Lightening up

Masking Paints for Airbus
(PresseBox) (Oldenburg/Nordenham/Münster, ) RELIUS, today part of BASF's Coatings Division, offers a superspecial masking paint to shave millimeters off Airbus parts.

Up in the stratosphere, every pound counts. The large aluminum parts used in aircraft construction, which are thin to begin with, are generally slimmed down through etching with chemical solutions. In order to ensure that only the desired spots are chemically "milled", the experts at RELIUS have specially developed a solvent-free two-component masking paint for the Airbus plant in the northern German city of Nordenham. The paint also hardens quickly. It protects the aluminum substrates as the parts are dipped in sodium hydroxide solution. Thus, weight is reduced only on the surfaces that have not been coated with the special paint.

RELIUS' two-component masking paint is applied prior to the chemical milling process. A special spray unit is used to completely coat the airplane parts with masking paint. After 30 minutes of drying time, a computer-operated laser cuts the dried coating following a pre-determined geometric pattern. The cut edges of the groove serve as a natural seal, eliminating complicated sealing work. The paint on the laser-cut spots can be stripped off easily by hand.
Then the entire part takes a dip in a sodium hydroxide solution. The uncoated areas are etched by the solution and thinned down precisely to the millimeter. With this method, the aluminum is reduced from a starting thickness of six millimeters to a mere two millimeters. All other areas are safely protected with the two-component masking paint, retaining their original thickness. Once the chemical milling process has been completed, the masking paint is removed from the part completely.

Less effort, greater efficiency, and environmental sustainability - there's no other product like it on the market.

The method involving masking paint to chemically mill aluminum has been around for over 35 years. So what makes RELIUS' two-component masking paints so unique? "What's special about our masking paint is that it's solvent-free and hardens quickly," explains Dieter Hohnholz, head of New Technologies at RELIUS, who played a major role in the development of the product. "There's no other product like it on the market." The paint film can be stripped off completely, without leaving any traces, and it does not have to be disposed of separately as special waste. On top of that, the Airbus plant in Nordenham has been able to completely shut down its solvent recovery unit.

The masking paint consists of two components: base paint and hardener. They are delivered separately and are mixed in a special two-component spray unit just before application. The new RELIUS paint requires just one spraycoat, as opposed to the two or three spraycoats needed when conventional masking paints are used. The short hardening time of 12 to 13 seconds means that vertical and round components can also be coated easily. After a total drying time of just 30 minutes, the next step in the production process can be started. This innovation saves valuable time - taking just a fraction of the four hours that used to be required.

The long development period of eight years has paid off. The Airbus plant in Nordenham is using the innovative product on the fuselage of the A380, the world's largest commercial airliner. Every week, RELIUS ships two containers of masking paint and hardener to Nordenham.

Kontakt

BASF Coatings GmbH
Glasuritstraße 1
D-48165 Münster
Dr. Michael Golek
BASF Coatings AG
Global Communications
BASF Coatings AG
Social Media