Five New Bandpass Filters for Pyroelectric Detectors

Set up Your Detector for Different Gas Measurements
Five New Bandpass Filters for Pyroelectric Detectors (PresseBox) (Olching, ) LASER COMPONENTS introduces five new bandpass filters for pyroelectric detectors, increasing the number of standard filters available to an outstanding seventeen versions. The new filters include reference filters (B) and filters for the detection of CO2 (A), water vapour (M), methane (S), and alcohol (O), and are either mounted directly inside the fixed cap of the detector or available as a separate cap, which is then mounted to an existing pyroelectric detector. A reference filter should not have any gas absorption. Filter B can be used when SO2 is part of the gas mixture (lpeak = 3,86 μm, FWHM = 90 nm).

The CO2 filter A with an lpeak = 4.265 μm is the filter with the best possible signal and simple linearization (FWHM = 110 nm).

Water vapour is in almost every gas mixture, which often leads to a disturbing background noise. An attempts to measure this with a 2.94 μm filter, for example, lead to problems of cross-sensitivity with CO2. The M filter has proven more reliable in such practical applications: lpeak = 5,78 μm, FWHM = 180 nm.

Methane is primarily measured at 3.33 μm; however, this is not particularly specific. An excellent alternative is the S filter, which operates at a longer-wave band: lpeak = 7,91 μm, FWHM = 160 nm.

Breath alcohol measurement is becoming more and more popular. The new standard filter has the following specifications: lpeak = 9,50 μm, FWHM = 450 nm.

 

 

 

Kontakt

LASER COMPONENTS GmbH
Werner-von-Siemens-Str. 15
D-82140 Olching
Stephan Börner
LASER COMPONENTS GmbH
Presse/PR

Bilder

Social Media